Skip to main content
Bolt Iot logo
  • Category: internet of things
  • Auth: API_KEY
  • Composio-managed OAuth available? N/A
  • Tools: 6
  • Triggers: 0
  • Slug: BOLT_IOT
  • Version: 20261030_00

Tools

Slug: BOLT_IOT_ANALOG_READTool to read the analog value from a specified pin on a Bolt device. Use when you need sensor readings (0–1023) after confirming the device is online.

Input Parameters

string ("A0" | "A1" | "A2" | "A3")
required
Analog input pin to read. Valid values: ‘A0’, ‘A1’, ‘A2’, ‘A3’.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: BOLT_IOT_CHECK_DEVICE_STATUSTool to check whether a specified Bolt device is online. Use when you need to verify device connectivity before sending commands (e.g., control signals). Example: ‘Check if device BOLT1234567 is online.‘

Input Parameters

string
required
Unique identifier of the Bolt IoT device. Must be in the format ‘BOLTXXXXXXX’.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: BOLT_IOT_DIGITAL_WRITETool to set a digital pin HIGH or LOW on a specified Bolt device. Use when controlling actuators or LEDs via digital output.

Input Parameters

string
required
The digital pin number to set (e.g., ‘0’, ‘1’, etc.).
string ("HIGH" | "LOW")
required
Desired digital output state for the pin: ‘HIGH’ or ‘LOW’.
string
required
The name or ID of the Bolt device as shown in your Bolt IoT account.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: BOLT_IOT_SERIAL_READTool to read incoming serial data from a Bolt device. Use when you’ve initialized UART with serialBegin and need to retrieve serial data.

Input Parameters

integer
ASCII value of the character up to which data should be read. If omitted, reads until newline (ASCII 10).
string
required
The name or ID of the Bolt device as shown in your Bolt IoT account.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: BOLT_IOT_SERIAL_WRITETool to send serial data to a Bolt device. Use when you need to transmit ASCII data over UART after initializing UART with serialBegin.

Input Parameters

string
required
Data string to transmit as ASCII characters over UART.
string
required
The name or ID of the Bolt device as shown in your Bolt IoT account.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not
Slug: BOLT_IOT_SERIAL_WRITE_READTool to send serial data and read the response on a Bolt device. Use when you need to transmit ASCII data over UART and capture its reply immediately.

Input Parameters

string
required
ASCII string to transmit over UART.
string
required
The name or ID of the Bolt device as shown in your Bolt IoT account.

Output

string
required
Data from the action execution
string
Error if any occurred during the execution of the action
boolean
required
Whether or not the action execution was successful or not